The advanced 100 Gigabit/Gigabit Ethernet communication interface and built-in IP protocol stack enable the instrument to realize long-distance data transmission through the internal LAN and the Internet. It is convenient for the establishment of laboratories, the configuration of laboratories, and the management of analytical data.
The instrument is equipped with advanced electronic flow control unit (EFC) and electronic pressure control unit (EPC), which realizes the digital control of the gas flow path, which greatly improves the stability of the instrument and the reproducibility of analysis results.
The instrument is equipped with a 7-inch color LCD touch screen, which supports hot swapping and can be used as a handheld controller.
The instrument adopts the parallel working mode of multiple processors, which makes the instrument more stable and reliable; A wide range of high-performance detectors such as FID, TCD, ECD, FPD and NPD can be optionally installed, and up to three detectors can be installed at the same time, and the FID detector has an automatic ignition function.
The new microcomputer temperature control system has high temperature control accuracy, superior reliability and anti-interference performance; It has eight completely independent temperature control outputs, which can realize 16-step temperature programming; With the automatic rear door opening system of the column box, the near-room temperature control ability is improved, and the raise/cool speed is faster. Each heating control unit has an over-temperature protection function.。
The instrument is equipped with a dedicated workstation that can support the access of multiple chromatographs at the same time, realize data processing and reverse control of the instrument, and simplify document management.
The chromatograph machine has a built-in low-noise, high-resolution 24-bit AD circuit, and has the functions of baseline storage and baseline subtraction.
The chromatography microcomputer system with completely independent intellectual property rights has the standard protocol of MODBUS/TCP, which can be connected to the DCS system.
